Page Top

Page Top



  • Player who is looking for higher trajectory with Low kickpoint shaft.
  • Player who would like to reduce slice for longer distance in avarage.
  • Player who is aiming for straighter shot.
  • Lady golfer who has higher swing speed than avarage lady golfer.
  • Player who is looking for a forgiving club.

HONMA's special FW with long carry performance and control.

  • 3W adopts the cup face with high deflection on impact for a long carry distance.
  • The amount of deflection depends on the golfer will achieve the control, powerful trajectories and longer carry distance.
  • The enhanced potential of the new head design
  • The lower center-of-gravity expands the length of the face and allows us to bring the center of gravity on the face closer to the center point, resulting in a higher smash factor.
  • All clubs become ordnances with the center-of-gravity flow design
  • The fairway wood series performance is enhanced by controlling the sole thickness for each club.

Cup face structure

The concave zone (thin section) of the upper and lower face, increases the amount of deflection of the face, which increases the repulsion, providing control and powerful trajectories (adopted for #3 only).





Crown's partially different thickness design


The reinforced internal mesh structure is optimized on the S-05 FW crown. This design optimizes the deflection and resilience caused during impact.

Inclination of head at address lie (45°).

S-05 FW
S-05 FW
Silhouette of S-03 3W
Silhouette of S-05 3W
S-03 #3 Face's Center of Gravity
S-05 #3 Face's Center of Gravity
of the ball

With the previous model, there is dead space between the toe side of the sole and the ground at address.
S-05 FW is designed to have the sole shape in which the sole surface on the toe side is brought close to the ground, which reduces the dead space, providing the center of gravity -2.5 mm lower, even though the face height is 2 mm higher (compared to S-03 #3).
As a result, height of the hitting area expanded 4.5mm, and gained high trajectories with low spin.
This provides an easier address position.

The thickness is controlled for each club by the center-of-gravity flow design

center-of-gravity flow design
center-of-gravity flow design
Position of remaining weight
(7.5-g tungsten for all clubs)
The deep/Low center-of-gravity grips the ball at impact. Balls are easier to hit in high and straight trajectories, providing longer carry distance.
With the shallow center-of-gravity, balls are prevented from being over-gripped, allowing you to stop the balls in fade trajectories with the appropriate spin.

Page Top


Head material/Manufacturing process SUS630/Forged
Face material/ Manufacturing process High-Strength Custom Steel/Forged
Shaft ARMRQ∞ 48, ARMRQ∞ 53, ARMRQ∞ 44
# (No.) 3W 5W 7W
Length(inches) 43.0 42.5 42.0
Loft (deg.) 15 18 21
Head volume(cm3) 190 179 171
Lie angle (deg.) 59.0 59.5 60.0
Distance to Center of Gravity(mm) 33.0 32.5 32.0
Height to Center of Gravity(mm) 23.0 24.0 24.0
Effective hitting area(mm) 15.0 13.5 13.0
Depth to Center of Gravity(mm) 32.0 31.5 31.0
Gravity Angle(deg.) 27.0 24.0 22.0
Swing weight・Gross weight (g) ARMRQ∞ 48 R D0・298 D0・302 D0・306
SR D1・301 D1・305 D1・309
S D1・302 D1・306 D1・310
ARMRQ∞ 53 R D0・309 D0・313 D0・317
S D1・313 D1・317 D1・321
ARMRQ∞ 44 R D0・295 D0・299 D0・303
Data refers to the 2S grade
Made in Japan
2S 3S 4S

Page Top


ARMRQ∞ 48(Standard feature)

Material Carbon+eight-axisUD
Kick-point Low-Mid
Flex R,SR,S
Butt diameter (mm) R 15.3
SR 15.3
S 15.4
Tip diameter (mm) 8.6
# (No.) 3W 5W 7W
Gross weight (g) R 48.0 47.5 47.0
SR 49.5 49.0 48.5
S 51.0 50.5 50.0
Torque (deg.) R 4.45
SR 4.40
S 4.35
Frequency (cpm) R 254 261 268
SR 262 269 276
S 270 277 284
Data refers to the 2S grade/shaft only


Material Carbon+eight-axisUD
Kick-point Mid
Flex R,S
Butt diameter (mm) R 15.4
S 15.5
Tip diameter (mm) 8.6
# (No.) 3W 5W 7W
Gross weight (g) R 53.5 53.0 52.5
S 56.5 56.0 55.5
Torque (deg.) R 3.75
S 3.65
Frequency (cpm) R 273 280 287
S 289 296 303
Data refers to the 2S grade/shaft only


Material Carbon+eight-axisUD
Kick-point Low
Flex R
Butt diameter (mm) 15.1
Tip diameter (mm) 8.6
# (No.) 3W 5W 7W
Gross weight (g) 43.5 43.0 42.5
Torque (deg.) 5.40
Frequency (cpm) 220 225 230
Data refers to the 2S grade/shaft only

Page Top


Name BERES RubberⅢ
Material Rubber
Shaft ARMRQ∞ 48, ARMRQ∞ 44 ARMRQ∞ 53
Gross weight (g) 38 43
Size 60 60
Data refers to the 2S grade

Page Top



Page Top